|
Linux Terminal Server Project - Documentation
Michael Habbe habbe@ltsp.org and Todd Lyons tlyons@mandrakesoft.com have updated this excellent document for installing LTSP on a Mandrake system. This update now includes information for Mandrake 8.2
Choosing an eprom to be used for a bootrom Jim McQuillan jam@Ltsp.org Finally sat down and wrote down a few notes about figuring out what kind of eprom should be used for making bootroms for various network cards.
Instructions for an LTSP workstation to run DOS and Linux from Mandrake 7.0 Philip A. Roa Phil@Intelisoft-phils.com did an excellent job of setting up an LTSP environment, where he could boot a workstation via the network, either as a Linux workstation or as a DOS workstation. Then, he documented the process and submitted it to us.
Instructions for setting up floppyd with LTSP-3.0 (Updated Jan 1, 2002) Scott Balneaves sbalneav@ltsp.org put together a nice set of instructions for setting up floppyd from the mtools package, to access a floppy drive on an LTSP workstation
Using Photo Paint 9 with LTSP workstations James Troup zion@adam.com.au put together a great document describing how to setup Corel Photo Paint 9, for use with LTSP workstations.
James Linder jam@tigger.iinet.net.au put together a great PXE booting howto, based on a message that Marty Connor mdc@thinguin.net (of Etherboot fame) had posted to the Etherboot mailing list some time ago.
LTSP + NVidia Binary Drivers How-to Byron Poland wpoland@speakeasy.net has contributed a document describing how to install the NVidia binary drivers for use with an LTSP workstation.
Plug 'n' Play (PNP) devices with LTSP Jelmer Vernooij jelmer@nl.linux.org has contributed a document describing how to use Plug-N-Play devices with LTSP.
Scott Balneaves sbalneav@ltsp.org contributed a pretty good document describing how to build your own kernel to work with LTSP.
3Com's MBA Remoteboot Howto RTF version Conrad Lawes (Conrad_Lawes@3com.com) from 3Com's Lanworks division sent us this document that describes how to boot an LTSP workstation using a 3Com MBA (Managed PC Boot Agent) bootrom. It's always nice to get help from the big guys in networking.
Suggestions on Server Configuration Spencer Kittelson spencertk@abasys.com did a great job of collecting and organizing a bunch of email messages regarding setting up a suitable server for an LTSP environment.
Thinking about Server I/O and Memory Spencer Kittelson spencertk@abasys.com wrote up a nice document describing various I/O and Memory issues on a server.
Jorge Eduardo Nieto jnieto2k@netscape.net did some homework and figured out how to setup international keyboards with LTSP.
LTSP on the Iopener:Iopener/LTSP installation guide
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||